Added by Jason Edge on July 14, 2013 at 8:48am — No Comments
Chris had posted this yesterday and just reposting in a new message. I notified the seller that this is a 64 lower bumper end.
Here is the link:…
ContinueAdded by Jason Edge on July 14, 2013 at 7:37am — No Comments
This may be more of a 60s problem but I have issues with the exhaust system getting pretty banged up over bumps with two adults sitting in the rear. All is fine without rear passengers. The car is running new (Autozone) shocks all around and P235/75 tires. The exhaust system is 2 years old and the muffler seems to take the majority of the abuse. Is there a placement issue or does the car really need an air shock setup in the rear? Thanks ahead of time.
Added by Michael J on July 12, 2013 at 10:42am — 17 Comments
Added by Jason Edge on July 12, 2013 at 6:19am — No Comments
Added by Jason Edge on July 9, 2013 at 11:25am — No Comments
Added by Jason Edge on July 8, 2013 at 4:06pm — 1 Comment
Added by Jason Edge on July 8, 2013 at 6:38am — No Comments
hi all
there is a heater hose that goes from the water pump to the heater tap. it appears there is a factory canal for this to follow but would appear to be a moulded hose needed there. I am just using normal heater hose that can not turn the 2 90 degree bends. is this moulded hose available?
Added by john chalk on July 7, 2013 at 7:35pm — 10 Comments
Rarely does Classic Cadillac Parts deliver items, but for those of you headed to Boston (or along the way) I will be glad to pack the Escalade EXT with large, heavy items you might need.
I have several engine blocks, many cylinder heads, tons of radiator supports, inner fender wells, at least a dozen…
ContinueAdded by Jason Edge on July 7, 2013 at 1:47pm — No Comments
I've ended up with two new 64 Cadillac trunk flip cover Crests (extra was just sold) and no springs as I can't find my old one now! I need a good solid flip cover spring. If anyone has a good solid one email me at jasonedge@nc.rr.com. 2 to 3 day priority shipping in a small flat rate box will be fine.
Also still looking for the 1964 Turbo Hydramatic Tilt Gear Shift lever with the Dark Sandalwood end cap in nice condition.
Jason.
Added by Jason Edge on July 7, 2013 at 1:30pm — 2 Comments
Added by Jason Edge on July 7, 2013 at 7:13am — No Comments
I have figured out why the power seat in my '63 convertible moves so slowly. The motor works fine by itself, but the gears in the power seat transmission are really sticky. When you turn the input shaft by hand it is hard to make it turn, they are so sticky. What do you clean the old stuff off with? The gears are nylon. I don't want to melt them with a solvent. After getting the sticky off, what type of lubricant…
ContinueAdded by John Serfling on July 6, 2013 at 8:07pm — 10 Comments
"I need to replace the foam in the front seat cushion of my '63 convertible. Do pre-fabricated foam sets exist for this car? All I find are ones for the muscle cars and sports cars. Any recommendations for the type and thickness of foam to get, if I can't find pre-fabs?"
Added by John Serfling on July 6, 2013 at 8:00pm — 1 Comment
Added by Jason Edge on July 6, 2013 at 7:06am — No Comments
Added by Jason Edge on July 5, 2013 at 6:32am — No Comments
Happy Fourth of July for those of you in the USA and abroad celebrating our Independence Day.
I wanted to share a Red White and Blue picture that was Cadillac related and couldn't think of anything better than the fantastic cover of the current July 2013 with the Red, White and Blue 1953 Eldorados. (Of course 1963's or 1964's would have been very cool!).
With that said, check out the Cover below taken at last years Grand National and be sure to join the Cadillac LaSalle…
ContinueAdded by Jason Edge on July 4, 2013 at 1:43pm — No Comments
I made some slight revisions to our "Join Chapter" flyer and encourage you to forward to, or print and give to other prospective 1963/64 Cadillac Chapter members you run into.
If you hover over the 'Join Chapter' tab above with your mouse cursor you will see a link to a 'Chapter Flyers' page located at https://6364cadillac.ning.com/page/chapter-flyers.
At the page you will find the following with…
ContinueAdded by Jason Edge on July 4, 2013 at 8:37am — No Comments
Added by Jason Edge on July 4, 2013 at 7:18am — No Comments
just have the manifold off my car to replace a blown intake gasket. did not take enough notice when the carby came off - it is a carter - so when I refit - confirm - Manifold - Gasket - Bakelite spacer - Gasket - Shim - Carby ! cheers
Added by john chalk on July 4, 2013 at 3:55am — 1 Comment
My wife's cousin is into military modeling and never really does "model cars" but as a favor, has taken one of my 64 CDV JoHan models and is having a go at it. He just posted the following picture on their Facebook page which I thought I would share here:
…
ContinueAdded by Jason Edge on July 2, 2013 at 9:36pm — 5 Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
Started by Jason Edge in General Discussion 22 hours ago. 0 Replies 0 Likes
I have been quiet lately, and just wanted to jump in an chat a minute. I have back to back visits to potential CLC Winter Board and Grand National Sites, not to mention I have been pushing to get…Continue
Started by Jason Edge in General Discussion 22 hours ago. 0 Replies 0 Likes
Very busy day working the parts cars yesterday, pulling engine and transmission out parts car #59, getting parts car #60 off the car hauler, then parts car back up on car hauler for final…Continue
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by