Hi Everyone, I want to remove my ignition lock assy and have the cylinders corrected to the doors. I have read the manual and it says insert a paper clip (0.035"dia) in the release hole and turn the key to the left.

Sounds easy but I have 2 release holes and I am having trouble sticking paper clips and turning the key at the same time. So I know the lock assy is not per the manual but it is a GM key. Any suggestions..its one of those simple things that get you chesed after about 45…

I'll be taking the 98K 1964 DeVille Convertible down in the next few days. I've posted quite a few pictures with more description on my Classic Cadillac Parts Facebook page which you can see at this link:  …

Mark Geertsma 1963 4 Window Sedan Deville…

Hey guys, whats the difference in a part called a reproduction and  called a replacement?  I'm looking at door jamb switches and the reproduction costs more than the replacement.  It sounds like a reproduction is not made by the OEM but a replacemnt sounds like not the original but something that will work..any thoughts? Tom 

If you check need something for your 63/64 Cadillac be sure to check out our Parts Suppliers and start with our "in house" parts suppliers listed up top.  Me, Jeff, Russ, and Bill are listed and I always send my customers to this page when I don't have something.

If you need something also post a "Parts Wanted -" message per instructions up top on the parts suppliers page. (I posted a Parts…

 …

When I swapped in the tilt steering column in my 64 CDV years ago I did not have the short tilt lever and tilt gear shift lever with the sandalwood (beige) cap. If anyone has either in nice condition, with tight cap, and smooth chrome, email me at jasonedge@nc.rr.com.  

I'm emailing our "in house" Parts Suppliers and hope someone can come up with something before next…