When I swapped in the tilt steering column in my 64 CDV years ago I did not have the short tilt lever and tilt gear shift lever with the sandalwood (beige) cap. If anyone has either in nice condition, with tight cap, and smooth chrome, email me at jasonedge@nc.rr.com.
I'm emailing our "in house" Parts Suppliers and hope someone can come up with something before next…
ContinueAdded by Jason Edge on November 5, 2012 at 5:00pm — 2 Comments
Added by Jason Edge on November 4, 2012 at 9:36am — No Comments
There are many cool features about our new website hosted by Ning and we have not taken advantage of many of them. I have just created a private invitation only "Group" for our 63/64 Chapter Members where we can discuss "chapter stuff" in privacy.
Keep in mind that our Chapter is A Free Inclusive Club and invite everyone that has not already joined the CLC and our Chapter to join up and become an active member in our club. …
ContinueAdded by Jason Edge on November 4, 2012 at 9:23am — No Comments
Added by Jason Edge on November 2, 2012 at 5:37am — No Comments
I finally found and fixed the remaining pesky water leak into the passenger compartment. This is the 1st time since owning this car (28 years) that it does not leak from somewhere. I have resealed the windshield, back glass, trunk seal, door seals, & window seals over the years. This last leak eluded my for the longest time. Water would end up on the front passenger floorboard after washing the car. Thinking it was still the windshield I pulled the dash pad and had a friend pour water…
ContinueAdded by Kurt on November 1, 2012 at 8:49pm — No Comments
I recently found and fixed a pesky leak where water was entering the passenger compartment and winding up on the front passenger floorboard. I can post details about that if anyone is interested in a separate blog. My wipers have always as long as I have owned this car (29 years) had a delay from the time I flip on the switch til they start wiping, up to a minute sometimes. I have also seen where they have a delay after I turn them off til they stop wiping. I had the dash out recently and…
ContinueAdded by Kurt on November 1, 2012 at 12:33pm — 11 Comments
Added by Jason Edge on November 1, 2012 at 7:03am — No Comments
Added by Jason Edge on October 31, 2012 at 7:19am — No Comments
Added by Jason Edge on October 30, 2012 at 7:21am — No Comments
Taking part in the recent Carolina Region meet-up in Lenoir, NC was a highlight for me and Cheryl and have to say you will not meet a nicer bunch of Cadillac enthusiasts starting with President Greg Powers and newsletter editor Travis Dowell. They really made me and Cheryl feel right at home for our first meet-up with the region and I am honored to have my 64 CDV grace the cover of their November Newsletter.
If you have not…
ContinueAdded by Jason Edge on October 29, 2012 at 8:30pm — No Comments
Hi Guys, this may sound odd because I have a De Ville Convert but I found and got working a GE 9in B&W TV that worked on 120V, 12V or a big battery and I want to mount it somehow in the back seat. I am sure the Limo version had TV's put in by shooters of that time. Question is what did it look like. Does anyone have one or a picture of some limos of the time..like a Caddy with a TV antenna on it? or even a Lincoln..I know I have to do the analog to digital switch but think its a cool…
ContinueAdded by Tom Kissel on October 29, 2012 at 7:23pm — 1 Comment
hey gang 1963 intake manifold same for a 64?found a good one if it doesnt fit my 63 can sell, thanks
Added by tim sparks on October 29, 2012 at 12:26pm — 1 Comment
Added by Jason Edge on October 29, 2012 at 7:24am — No Comments
Added by Jason Edge on October 28, 2012 at 8:09am — No Comments
Just posted some picture on my Classic Cadillac Parts FB page at https://www.facebook.com/media/set/?set=a.440226109358436.93587.381612128553168&type=1
If you need trim, etc off a 63 CDV email me at jasonedge@nc.rr.com. My first priority is the 64 DeVille Convertible parts car but pulled some of the trim off the 63 CDV…
ContinueAdded by Jason Edge on October 27, 2012 at 3:44pm — 4 Comments
Added by Jason Edge on October 27, 2012 at 11:33am — No Comments
Added by Jason Edge on October 26, 2012 at 7:02am — No Comments
Added by Jason Edge on October 25, 2012 at 7:10am — No Comments
Added by Jason Edge on October 24, 2012 at 6:33pm — No Comments
Added by Jason Edge on October 24, 2012 at 7:28am — No Comments
2025
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
Started by Jason Edge in Newsletters 8 hours ago. 0 Replies 0 Likes
Here is another sneak peak of our next newsletter feature - Denis Binette's 14K mile 1964 Coupe de Ville. I hope to have this distributed within the next couple of weeks. …Continue
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON on Saturday. 1 Reply 0 Likes
Hey everyone, I need to replace my transmission input seal before spring starts, I’ve been losing a lot of fluid post Sunday drive. I figured I’d do the rear main seal service bulletin at the same…Continue
Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson on Thursday. 2 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb Feb 24. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by