Is there anyone in central Massachusetts with a 1964 Cadillac willing to let me look at your hood release? I'm still trying to figure out how to adjust mine. Thanks Jim
Tags:
The lower grill is adjusted so you can put your fingers up through the gap between the lower and middle grill. The lower grill is positioned behind the upper grill.
The lever is just behind the gap. I thought I had a picture, but I can not find it.
Thank you for the photos. I need to take precise measurements so I can adjust my grill.
I gave up on the awkward hood release and since mine is not a points car, had someone add a normal hood pull knob under the left side of the dash, just like a normal car. Available at any parts store. Works like a charm. Pull, clunk, done.
BTW, I also got tired of hard starts and added a manual choke, like cars should have, made a huge difference.
Thanks John, something to consider...
Agree with all of that if running the car for half an hour includes driving it!
I had an electric choke, useless. Mine at least had zero temperature sensing. They just imagine a temperature and go with it. Choke-wise, my way works well too: three gas pedal pumps, pull the choke while the pedal is depressed to set fast idle, start. If it stumbles a bit, more pedal presses.
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 6 Replies 0 Likes
Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Dennis P. DiBari yesterday. 2 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 4 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies 0 Likes
While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2025 Created by Jason Edge. Powered by