"Thanks Jason!"
Latest Activity
"Excellent addition to the website!
Dennis DiBari"
"My plan is to run the same header Sunday to Sunday. Since we started this mid week, I will run these two Caddys until Sunday April 6. If you have any side profile car pics you want to use reply below. Else I will just pick from the member cars…"
"Regarding the radiator hoses, here is the blurb I included in my Radiator Recore article from the last newsletter:
New Radiator Hoses There were several items I would want to address while the radiator was being recored, including new…"
Quick weekend project
Looking to replace the belts and rad hoses. anyone have the part numbers for a 1964 Fleetwood w AC? thanks! See More
"Just added a source for rebuilding HydraMatic Transmission here in NC near Charlotte:Classic Hydramatic - www.classichydramatic.comGM Hydramatic Transmission SpecialistsBill Sapielak, Classic Hydramatic Concord, NC 20827ph: 734-674-8938,…"
"I have added Christian Doerk's 1964 Fleetwood 60 Special as the '64 in the header and will plan to run each for a week. I will try to tweak the header a bit to make look better going forward. I will really need to use side or wider angle…"
"Nice!"
"Jason,
The header looks really good! A very nice touch added to the website.
Dennis DiBari"
Website Header - Experimenting with Rotating Member Cars
I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad. For those of you on the cell phone select desktop view from the drop down menu and check it out. For those you use on desktops & laptops just look up. I will maybe swap in a member 64 on the right, and maybe try and update once a week?Looking at the header I am trying to remember why that black…See More
"Hi Jason,
That really sounds like an excellent idea!
Dennis DiBari"
6
"Your picture gave me an idea. We have our sort of bland header with the 63 and 64 front clip, how about rotate member 63's on left and member 64's on the right? I can pull from our Member Cadillacs or just grab the from posts by…"
"Thanks! Like the color on your 64. You don’t see that very often."
"Hi Mike,
Any luck with the coolant overflow tank we talked about for your Caddy?
Dennis DiBari"
"Hi Allen,
Thank you for the response. Let me know if you get it done and how you make out with the re-install. Always good speaking to you and good luck with the pinion seal! We have a great chapter because of…"
"Dennis,
Sorry to be so slow in responding. Out of town for a week. The man who will repair the seal has had some big projects so still waiting. He and I very much appreciated your thoughts on the matter. I hope to be quietly…"
"It is pretty much a given the leak will persist if bearing mod is not made especially considering it was such an issue that a Serviceman Bulletin was issued in 1965 for the fix. I would also say everyone without the knowledge of this fix (i.e.…"
Photos
Members
Forum
Quick weekend project
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 15 hours ago. 2 Replies 0 Likes
Looking to replace the belts and rad hoses. anyone have the part numbers for a 1964 Fleetwood w AC? thanks! Continue
Website Header - Experimenting with Rotating Member Cars
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies 0 Likes
I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 6 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Techniques for replacing pinion seal on differential
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 5 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 13 Comments 0 Likes
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
