Added by Jason Edge on February 28, 2013 at 6:55am — No Comments
Here's a little piece I wrote up and included in the Feb 2013 Newsletter regarding what to do with those shop manuals coming apart at the seams:
Turn that “Falling Apart” Shop Manual
into an Ultimate Workbench Companion!
by Jason Edge
…
Added by Jason Edge on February 27, 2013 at 3:00pm — 8 Comments
Trying to work on the clock out of my 64. When I put a charge to it, the contact points chatter back and forth, sounding like a doorbell buzzer. I don't see the gears moving and the points never snap back. Has anyone experienced this? Ted
Added by Ted Mandalakis on February 26, 2013 at 11:45pm — 1 Comment
Trying to work on the clock out of my 64. When I put a charge to it, the contact points chatter back and forth, sounding like a doorbell buzzer. I don't see the gears moving and the points never snap back. Has anyone experienced this? Ted
Added by Ted Mandalakis on February 26, 2013 at 11:45pm — No Comments
Added by Jason Edge on February 26, 2013 at 3:00pm — No Comments
Added by Jason Edge on February 26, 2013 at 2:00pm — 2 Comments
Added by Jason Edge on February 26, 2013 at 7:49am — No Comments
I'm pleased as a pickle that we have just signed up our 600th website members tonight! This is everyone's site and do encourage everyone to feel free to post and interact with others. We are an open group that welcomes all 63 & 64 Cadillac owners and enthusiasts to our fold, regardless if you drive a 62 series sedan or an Eldorado, or are into keeping your car original, or restoring your car, or going for the custom mods. Our only rules is that we treat each other with civility and…
ContinueAdded by Jason Edge on February 25, 2013 at 11:51pm — No Comments
Added by Jason Edge on February 25, 2013 at 7:22am — No Comments
I lost my dad 6 years ago today to a senseless Catheritization gone bad, but remember and miss him everyday. He was a HUGE influence on my fascniation with cars, and a BIG help in getting my hobby with 1963 and 1964 Cadillacs off the ground.
I created a slideshow and posted on my YouTube page which you can also see below. I know your father's influenced many of you in your affections for cars and Cadillacs and thought I would share.…
ContinueAdded by Jason Edge on February 22, 2013 at 8:02pm — 4 Comments
Hi all, can anyone tell me, "how I can tell if I have the 1 1/2" or 1 7/16" upper control arm bushings on my car, while the bushing is on the car?" Mostly every auto parts place have 2 sizes listed, I hate to get the wrong part, but I also hate to take it apart and not have the new part ready to put on. I don't have the luxury of keeping the car apart for days. Any helpful hints would be greatly appreciated. Thank Jim
Added by Jim Pino on February 22, 2013 at 10:55am — No Comments
Added by Jason Edge on February 22, 2013 at 7:34am — No Comments
As mentioned earlier the host hotel is now Sold Out but I have attached a PDF document with information regarding the Host Hotel and Alternate Hotel. Note that there is free shuttle service between the two hotels and hope to see many of you in Boston so get your rooms booked …
ContinueAdded by Jason Edge on February 21, 2013 at 7:30pm — No Comments
Added by Jason Edge on February 21, 2013 at 7:38am — No Comments
We have had a Weekly Online Chat on our website (www.6364cadillac.com) the past two Sunday's at 6pm EST (eastern) / 3pm PST (pacific) / 11pm UK with limited participation. The first week we had maybe 8 or 10 online and this past Sunday about 3 or 4...maybe 5 total.
Since a few of us have had a chance to try it out, I wanted to ask everyone if there is a better time that might bring in a few more members.Things I considered for choosing…
ContinueAdded by Jason Edge on February 19, 2013 at 11:30pm — 5 Comments
Added by Jason Edge on February 19, 2013 at 7:47am — No Comments
Steele Rubber now has a better website that makes searching easier. They will also provide a list of parts available for your car via the free parts list link on their site. I created one for my 64 CDV and had a list the next day emailed to me.
You can see it by clicking on…
ContinueAdded by Jason Edge on February 18, 2013 at 8:00pm — 2 Comments
Starting to part out the 63 CDV. most roofline molding including the roof rear, rear qtr, and side and front panel trim is nice, as is many other pieces. You can see more pictures on my Facebook Photo Album at https://www.facebook.com/media/set/?set=a.489530027761377.102162.381612128553168&type=1&l=0a75c50ad3.
I thought…
ContinueAdded by Jason Edge on February 18, 2013 at 7:55am — 3 Comments
Added by Jason Edge on February 18, 2013 at 7:46am — 1 Comment
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari 8 hours ago. 4 Replies 0 Likes
I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue
Started by Jason Edge in Trivia. Last reply by Cees de Bunje 17 hours ago. 13 Replies 0 Likes
It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance. The Trivia Question is: What Movie Is this?…Continue
Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox yesterday. 2 Replies 0 Likes
Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue
Started by Jason Edge in For Sale yesterday. 0 Replies 0 Likes
I just pulled a very good Cadillac Cylinder Head Water Outlet Pipe for cars with AC with the extended arm for compressor. That came off a running parts and is a nice piece. Included is a new 180…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
ContinueApril 21, 2024 from 8pm to 9:30pm – Zoom
0 Comments 1 Like© 2024 Created by Jason Edge. Powered by