I had to swap Cadillacs today to get the 1964 Cadillac Parts car on the Car Hauler to finish up, however, there was a 1963 Parts car that had to be removed first and needed to have the 63 end up where the 64 had been parked. I ended up chaining the 64 to the car hauler to be able to pull it out and get it over in the center, so I could…
Added by Jason Edge on August 24, 2014 at 1:46pm — 5 Comments
I am like a kid in a Cadillac Candy Store when I am pulling these cars apart. This one was especially fun since it matches my personal 1964 CDV and several parts off this car have already found their way to 'Dino!". Weather Permitting I will knock most of this car out this weekend. Tools are set, and I am ready to GET IT…
ContinueAdded by Jason Edge on August 23, 2014 at 10:14am — 6 Comments
Good morning, Can someone tell me if I am missing something. I have removed four screws to change burned out bulbs in the back of my 64 SDV, but the plastic lenses will not come out. Are there also bolts from the back. I know it is very simple, but I do not want to force it. I have posted photos to show what I am talking about. Thanks
Added by David Cotton on August 9, 2014 at 9:07am — 2 Comments
As my wife and I were pulling into our regular spot at the local car show, our 1964 Classic Cadillac was immediately surrounded by several people. The method in which they swarmed the car was rather alarming, as they approached with such intensity. THAT IS MY OLD CAR shouted a very excited Man. Really said I- what is your name? Sure enough his name was on the Vehicle History and a long and interesting story was soon told. He owned our car from 1977 to 1987 and was able to fill in many blanks…
ContinueAdded by David Cotton on August 2, 2014 at 11:44am — 4 Comments
2025
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
Preston Bealle Online
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler yesterday. 7 Replies 0 Likes
Does anyone have a wiring diagram for the cruise control cutoff switch? (Or can someone draw the diagram?). My installation of the cruise control system is going well, though I am taking it slowly…Continue
Started by Jose Raul Ramirez in Wanted to Buy. Last reply by Russ Austin Aug 22. 1 Reply 0 Likes
The body shop lost my armrests! I need the driver's side and passenger side. The ISSUE is my 63 did not come with power windows It has manual crank windows so the armrests are not setup for switches.…Continue
Started by Jason Edge in General Discussion Aug 19. 0 Replies 0 Likes
If you follow my Classic Cadillac Parts Page you have already seen this a couple days ago but thought I would share here as it continues the replacement of tired, crusty hardware on "Dino" with…Continue
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Aug 17. 8 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
September 14, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by