Logan Robb
  • Male
  • Bloomington, IL
  • United States
Share on Facebook
Share on Facebook MySpace

Logan Robb's Discussions

Lower Front Grille 64 Fleetwood

Started this discussion. Last reply by Jason Edge Sep 20. 3 Replies

As I prepare for the CLC Fall Festival next weekend, I find myself finishing up everything on my list that I wanted to get done ACCEPT the lower front grille. Jason put together a SUPERB front grill…Continue

CLC Fall Festival

Started Sep 6 0 Replies

As the Fall Festival approaches, I am finding myself curious if anyone else will be attending from the group?I am hauling my Fleetwood up. I am hoping to see lots of other 64’s!Continue

Heat Soaked Starter

Started this discussion. Last reply by Russ Austin Aug 28. 1 Reply

When under the car to change over the transmission (see my other post), I noted that the passenger side exhaust runs RIGHT under the starter, it made me think that could be partially the reason why…Continue

1964 Fleetwood Transmission

Started this discussion. Last reply by Jason Edge Aug 28. 2 Replies

My woes are FINALLY finished. If you've been following along or in any of the group meetings, a consistent point of conversation for my Fleetwood has been the transmission. It started maybe 6 mos…Continue

 

Logan Robb's Page

Latest Activity

Dennis P. DiBari replied to Logan Robb's discussion Trans Pan Seal Replacement
"Logan,      Good work on the tranny.  Way to go! Dennis DiBari"
Oct 25
Logan Robb replied to Logan Robb's discussion Trans Pan Seal Replacement
"I will add- I got a "new" transmission from Jason.  I took the pan off, pained, and cleaned THOUROGHLY. All threads, gasket surfaces, etc. I also made sure the pan was not warped around the holes. Transmission, now installed and…"
Oct 25
Jason Edge replied to Logan Robb's discussion Trans Pan Seal Replacement
""Hope I can see the deformations..." --> lay it on anything flat"What grease to use?" --> shouldn't really matter. I just used a couple of dabs of sealer only to tack the gasket in place. The gasket will form your seal…"
Oct 8
Sammy replied to Logan Robb's discussion Trans Pan Seal Replacement
"Hope I can see the deformations...What grease to use? Maybe an example, make etc would help..."
Oct 8
Dennis P. DiBari replied to Logan Robb's discussion Trans Pan Seal Replacement
"Marty,      Excellent point about the pan!!!!!! Dennis DiBari"
Oct 4
Jason Edge replied to Logan Robb's discussion Trans Pan Seal Replacement
"Same sort of thing with the oil pans. The are notorious for getting over-tightened and bend down.  You big lipped channel locks and grip the lower lip and gently bend the entire section back upward then take two small flat pieces of wood…"
Oct 4
Marty Smith replied to Logan Robb's discussion Trans Pan Seal Replacement
"My 2 cents to this after agreeing with Dennis and Jason is to make sure that the areas surrounding the bolt holes have not been deformed by overtightening if they are use a hammer and drift to make them flat. "
Oct 4
Jason Edge replied to Logan Robb's discussion Trans Pan Seal Replacement
"I agree, no need for gasket maker. Just clean surfaces, make sure you bolts threads are clean (female threads in casing and male on bolt shank) and make sure they turn easily and torque to spec (13 ft/lb). Main think is don't overtighten!"
Oct 4
Dennis P. DiBari replied to Logan Robb's discussion Trans Pan Seal Replacement
"Hi Sammy,      I've been doing these tranny tune ups for myriad years in my dad's shop since the 70's.  After spotlessly cleaning the pan and gasket detritus, we applied a thin layer of heavy duty grease around the…"
Oct 3
Sammy replied to Logan Robb's discussion Trans Pan Seal Replacement
"Hi. doin' the same on my 63 CdV these days.What I'm not sure: using gasket maker (high temp silicone) on both sides on the new transmission pan seal or not?Read different opinions on that...Thanks for help.Sammy"
Oct 3
Jason Edge replied to Logan Robb's discussion Lower Front Grille 64 Fleetwood
"Shouldn't need to come off. I remove the entire assembly when parting a car. At works you might loose the upper bumper outer to inner fender "hanger" bracket from bottom and loosen the 4 large bumper bracket to frame bolts/nuts to the…"
Sep 20
Logan Robb replied to Logan Robb's discussion Lower Front Grille 64 Fleetwood
"Does the bumper need to come off? It looks like everything should come right out of there!"
Sep 20
Jason Edge replied to Logan Robb's discussion Lower Front Grille 64 Fleetwood
"I would use plenty of PB Blaster getting the perimeter fasteners off the old one, use a bright headlamp, and just take your time. "
Sep 20
Logan Robb posted a discussion

Lower Front Grille 64 Fleetwood

As I prepare for the CLC Fall Festival next weekend, I find myself finishing up everything on my list that I wanted to get done ACCEPT the lower front grille. Jason put together a SUPERB front grill for me several months ago and I have been afraid to tackle that job. I have the whole weekend to get the lower grille out and put back in. How hard of a job will it be? Looking for any tips and tricks, thank you!LoganSee More
Sep 20
Logan Robb commented on Jason Edge's photo
Thumbnail

63 Delco Example

"Whats very interesting is that my 64 has the 63 Delco master in it! Someone swapped at some point.  I intend to completely overhaul the breaks sooner rather than later. Need to source a good, modern replacement for the 64 or a good rebuild…"
Sep 20
Logan Robb posted a discussion

CLC Fall Festival

As the Fall Festival approaches, I am finding myself curious if anyone else will be attending from the group?I am hauling my Fleetwood up. I am hoping to see lots of other 64’s!See More
Sep 6

Profile Information

Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
1964 Cadillac Series 60 Fleetwood
Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
34291
1963/64 Cadillac Chapter Member?
Yes

Logan Robb's Blog

Lower Front End Ball Joints

Posted on May 11, 2023 at 9:04am 10 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

Comment Wall (2 comments)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 4:36pm on May 26, 2024, Dennis P. DiBari said…

Hi Logan,

     What a great picture of you, your wife, and the 64 Caddy Fleetwood on the front of the Self Starter.  I should be getting my print copy this week and can't wait to read the story!

Dennis DiBari, Cottekill, NY

At 12:28pm on January 11, 2023, Jason Edge said…

Hi Logan, Welcome to the 63/64 Cadillac Website and Chapter.  Great Profile picture!

Be sure and check out all the links and pages and make yourself at home. The Help Page at www.help.6364cadillac.com will have links to many useful articles and information about our Cadillacs.

 
 
 

Photos

  • Add Photos
  • View All

Forum

64 cadillac deville convertible interior

Started by Larry Rees in 1963/64 Cadillac Specific Discussion 56 minutes ago. 0 Replies

Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue

Dino Diaries - Power Vent Window Video Discussion

Started by Jason Edge in General Discussion on Wednesday. 0 Replies

Here is a short clip after a cruise around town today, discussing optional power vent windows and an intermittent problem I have with my left power vent. Continue

2025 calendars are ordered.

Started by Russ Austin in General Discussion. Last reply by Russ Austin Nov 25. 2 Replies

The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue

64 Deville Fuel Tank Sending Unit

Started by Jeff Tepper in Restoration Discussion. Last reply by Russ Austin Nov 25. 1 Reply

HI all,I replaced my sending unit with a no name one off ebay and it is all over the place. It does not even attempt to have any accuracy.We may try to fix the original unit. Seems like we need to…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service