I've got a couple questions for those in the know.
What years Cad V hood ornament will interchange? One point is broken on mine. Anyone have one?
OK, so I must be just dumb. How the heck do you get the driver door panel off?. I know there's screws on the bottom, nails on the sides. I can get the control panel up to disconnect. Inside door handle? etc?
Also, the wiper/washer motor and switch - what years interchange?
Thanks for any help.
Tom…
ContinueAdded by Tom Bahner on December 30, 2013 at 9:30am — 3 Comments
Needing some electrical help. My old '63 Sedan DV electrical system is not in the greatest shape.
A current MUST is wipers, as they don't work at all.. I'm waiting on a shop manual but it will be a week or so before it arrives. I't appears the washer and wiper motors are one unit, I'm guessing at all this stuff. With the key on and the switch on, ,I'm getting 12v to one side of the 2 wire plug, which I assume is the washer and to the middle contact on the 3wire connector, which I…
ContinueAdded by Tom Bahner on December 22, 2013 at 11:30pm — 2 Comments
Hello all, thought I would introduce myself. Tom Bahner here in Rossville Ks. Hope I'm posting this in the correct place, if not let me know. Absolutely love the looks of these old ledsleds.
Was happy to find this chapter as I have just become the owner of a 63 Sedan DeVille. She's pretty rough but being on a retired budget, was one I could afford that actually ran and drove. I thought about having it hauled the 3hr.trip home but decided to roll the dice and drive her home. PO…
ContinueAdded by Tom Bahner on December 20, 2013 at 10:32am — 2 Comments
Started by Jason Edge in General Discussion. Last reply by Matti Roth 3 hours ago. 2 Replies 0 Likes
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 28 Replies 0 Likes
I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle on Friday. 12 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in General Discussion on Friday. 0 Replies 0 Likes
I always get a kick out of the expression when someone asks how many…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2024 Created by Jason Edge. Powered by