Andy Kalnins's Discussions (24)

Discussions Replied To (19) Replies Latest Activity

"Tony- when you make reference to two washers with Permatex applied to them, are you…"

Andy Kalnins replied Jul 7, 2017 to Antifreeze leak at water pump/ crossover connection... HELP

19 Jul 29, 2017
Reply by Russ Austin

"Even though doubling the gasket on both sides of the cross over manifold got rid of…"

Andy Kalnins replied Jul 6, 2017 to Antifreeze leak at water pump/ crossover connection... HELP

19 Jul 29, 2017
Reply by Russ Austin

"Not what I wanted to hear, but I guess I needed to. Thanks. I only used 1 rubber o-r…"

Andy Kalnins replied Jul 6, 2017 to Antifreeze leak at water pump/ crossover connection... HELP

19 Jul 29, 2017
Reply by Russ Austin

"I ended up using an E18 socket. It worked great! (I didn't have any luck with the 12…"

Andy Kalnins replied Feb 21, 2017 to engine priming

9 Feb 21, 2017
Reply by Andy Kalnins

"I appreciate the parts you have accessible to us, but even more for the wealth of kn…"

Andy Kalnins replied Feb 17, 2017 to My Parts Overflow Area

21 Feb 18, 2017
Reply by Jason Edge

"I'm going with the dark ford blue, which is the closest I could find in an aerosol.…"

Andy Kalnins replied Nov 4, 2016 to Cadillac Dark Blue Engine Paint

4 Nov 5, 2016
Reply by John C.Churchill

"The bottom of my switch is busted out.the narrow strip opening is wider at the one e…"

Andy Kalnins replied Aug 2, 2016 to Reverse lights on 63 messed up

10 Aug 3, 2016
Reply by Jason Edge

"I should also add that when the steering column linkage is disconnected at the trann…"

Andy Kalnins replied Aug 2, 2016 to Reverse lights on 63 messed up

10 Aug 3, 2016
Reply by Jason Edge

"I had the same issue with my 63. As Russ said, I had found the wire wasn't moving fr…"

Andy Kalnins replied Apr 29, 2016 to 1963 Reverse Lights

5 Apr 29, 2016
Reply by Andy Kalnins

RSS

Photos

  • Add Photos
  • View All

Forum

How much play in 63 timing chain?

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 3 minutes ago. 2 Replies

I will be installing a new chain and gears because I'm in this deep and all the forums here strongly recommend doing so.  It appears the coating is intact and I don't have to worry about that debris…Continue

Harmonic balancer holes are too shallow for the 3 bolts of puller

Started by Ben Roberts in 1963/64 Cadillac Specific Discussion. Last reply by Ben Roberts 7 hours ago. 3 Replies

Trying to pull 1963 390 harmonic balancer.  The holes needed for the 3 bolts on the puller can only thread in 1/4” which is not enough to run an impact wrench on it.  I ran a tap to clean the threads…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 10 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

G-1 differential, $150

Started by Jimmy Davis in For Sale. Last reply by Jimmy Davis yesterday. 5 Replies

G-1 positraction differential, needs blasting and paint. $150. Pickup Huntsville AL or LTL, I recommend Averitt express. Send me zip for shipping quote.***Update- Sorry if you have tried to contact…Continue

Tags: differential, Rear, G-1

Blog Posts

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

AC/heater for 1964 Cadillac coupe de ville

Posted by Matias J. Adrogue on January 7, 2020 at 11:11am 9 Comments

Good morning!  I am Matias Adrogue.  I bought a 1964 Cadillac coupe de ville last year and am real close to the final restoration details!  I call her “Jaws 64”.  Pics will be posted soon.  I need advise regarding a AC/heater.  It came stock in the vehicle but it does not work.  A mechanic gave me a bid of $1700 to replace and repair.  I am ready to install a new system - Vintage Air or Old Air Products from Fort Worth Texas.  I would greatly appreciate your thoughts.  I read the great write…

Continue

63 cadi conv

Posted by Merlino jean marc on December 31, 2019 at 2:51pm 0 Comments

Hello everyone 

As a European, I fell in love with Americans cars and Americana stuff.

I bought a running 63 for cheap .but there is no secret when you buy cheap ,it is big project. The car needs everything. Overtime I was able to slowing buy parts .actually  I am looking for the passenger front lower section which is becoming harder ,and harder to find

The car has a lot of issue with rust.it needs a paint,a top and I need to replace all floor pans.with patience and…

Continue

Events

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service